HOME

Calculate MACH "Steps Per Unit" (see page 5-11 of manual for more information)


This currrently applies to ONLY screw and nut setups.

---

ENTER KNOWN VALUES HERE:
TPI:
MOTOR PULLEY TEETH # (if direct drive, enter "1"):
SCREW PULLEY TEETH # (if direct drive, enter "1"):
STEPPER RESOLUTION / SERVO ENCODER COUNT (e.g. "250"):
MICROSTEPPING COUNT / SERVO IN QUADRATURE (e.g. "4"):

---

Copyright 2011. figNoggle Designs. All rights reserved.